Haier AFD630IX User Manual - Page 14
CFL633CS/AFL631CB/AFL631CS
View all Haier AFD630IX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Function introduction Over temperature alarm When the temperature in the freezer storage compartment rises to a certain value, the Super Freeze indicator will flash and the buzzer will sound 1 beep every second. The buzzer may be silenced when the temperature in the freezer storage compartment drops to a specified level or by pressing any key. Turning off the fridge storage compartment Set the fridge storage temperature to OFF. The fridge storage compartment will be turned off while the freezer storage compartment operates normally. Turning off the refrigerator Set the freezer storage temperature to OFF. The refrigerator will stop operating. This function is not equivalent to turning off the power. 2 Models: CFL533CB/CFL533CS/CFL533AB/CFL533AS/CFL633CB/ CFL633CS/AFL631CB/AFL631CS Control panel Fridge storage Freezer storage compartment compartment temperature temperature A1 Switch on/off the fridge storage compartment A3 Super cool A5 Fridge temperature down A7 Freezer temperature down A9 Over-temperature/door open alarm A2 Holiday function A4 Fridge temperature up A6 Freezer temperature up A8 Super freeze A10 Power ON/OFF Initial powering on When the refrigerator is powered on for the first time, the power indicator and the fridge storage compartment indicator will light. The fridge storage temperature will be displayed as "-" due to the high temperature inside. The freezer storage temperature will be displayed as"- -" due to high temperature inside. The buzzer will beep. Press key A9, and the buzzer will be silenced. After the temperature decreases to certain level, the displayed temperatures of the fridge storage compartment and the freezer storage compartment will become the ex-factory settings "5" and "-18" respectively. Fridge storage temperature setup Press key A4 or A5 to set the fridge storage temperature. The fridge storage temperature cycles from 2 to 8. The setting is confirmed automatically 5 seconds after the operation is finished or by pressing any other key. 11