Haier CWH18B CWH18A Manual - Page 9

Window Installation-Position Cabinet in window

Get Haier CWH18B PDF manuals and user guides View all Haier CWH18B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Window Installation-Position Cabinet in window Place Cabinet In Window A NOTE: Windows come in a variety of different styles. Therefore, it may be necessary to modify or improve your particular installation. 1. Open window and mark center of window stool. B C A.Window Sash B.Seal B."L" Shaped Mounting Channel 4. Shift cabinet left or right as needed to line up center of cabinet on center line marked on stool. 5. Fasten cabinet to window stool with (2 )3/4" screws into holes(you may wish to pre_drill pilot holes). 2. Cut the seal strip to fit the underside of the bottom window sash. Remove the peel-off backing on the seal and attach it to this sash. A B A. Window Sash B.Window Sash Sealing Strip 3. Place cabinet in window with bottom stool angle firmly seated over window stool as shown . Bring window down temporarily behind top angle to hold cabinet in place. A C B A A.3/4" Screws (2) Install Support Brecket 1. Hold each support bracket flush against outside of sill,and tight to bottom of cabinet as shown. Mark brackets at top level of sill,and remove. A.Cabinet B.Stool C.Lower Channel 8 MARK

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
8
Window Installation-Position Cabinet in window
NOTE:
Windows come in a
styles. Therefore, it may be necessary to modify
or improve
your particular installation.
variety of different
1. Open window and mark center of window stool.
3. Place cabinet in window with bottom stool angle
firmly seated over window stool as shown
.
Bring window down temporarily behind top angle
to hold cabinet in place.
A
B
4. Shift cabinet left or right as needed to
line up
center of cabinet on center line marked on stool.
5. Fasten cabinet to window stool with (2 )
into holes(you may wish to pre_drill pilot holes).
3/4" screws
B
A
C
2. Cut
the seal strip
to fit the underside of the bottom
window sash
. Remove the peel-off backing on the
seal and attach it to this sash.
A
C
B
A. Window Sash
B.Window Sash Sealing Strip
A.Cabinet
B.Stool
C.Lower Channel
A.Window Sash
B.Seal
B."L" Shaped Mounting Channel
A
A.3/4" Screws (2)
Place Cabinet In Window
Install Support Brecket
1. Hold each support bracket flush against outside of
sill,and tight to bottom of cabinet as shown
.
Mark brackets at top level of sill,and remove.
MARK