Haier DWL3225SDSS Product Manual - Page 21
Electrical Shock Hazard, HELPFUL TIP, DIRECT WIRE METHOD
View all Haier DWL3225SDSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Direct wire method WARNING Electrical Shock Hazard Electrically ground dishwasher. Connect ground wire to green ground connector in terminal box. Do not use an extension cord. Failure to ground dishwasher can result in death, fire, or electrical shock. English 1. Install strain relief and route direct wire so that it does not A touch dishwasher motor or lower part of dishwasher tub. Pull direct wire "A" through hole in terminal box. HELPFUL TIP: Select the proper size twist-on connectors to connect your household wiring to 16-gauge dishwasher wiring. Insert wire ends into twist-on connector. Do not pre-twist bare wire. Twist connector. Gently tug on wires to be sure both are secured. 2. Connect the wire "B" as follows using twist-on connectors "C" sized to connect direct wire to 16-gauge dishwasher wire: From bare ground wire "D" into a U-shaped hook. Wrap ground wire hook clock- wise around ground connector "E" and under the washer "F". Securely tighten ground connector "E" and under the washer "F". Securely tighten ground connector "E". Do not untie knot in the wires. Black 3. Tighten clamp connector or conduit connector screws "G". 4. Reinstall terminal box cover "H" with wires inside G terminal box. Go to step 5. The cover must be outside the box on the right side. Make sure no wires are pinched by cover. Do not leave the box without the cover. 20