Haier DWL3225SDSS Product Manual - Page 8
Helpful Tip, Cabinet Requirements
View all Haier DWL3225SDSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
English Cabinet Requirements Do not run water drain lines or electrical wiring where they can interfere with or contact dishwasher motor or legs. The location where the dishwasher will be installed must provide clearance between motor and flooring. Do not install dishwasher over carpeted flooring. Protect dishwasher and water lines leading to dishwasher against freezing. Damage from freezing is not covered by the warranty. Check location where dishwasher will be installed. The location must provide • Easy access to water, electricity and drain. • Convenient loading. • Corner locations require a 2" (5.1cm)minimum clearance between the side of the dishwasher door and wall or cabinet. • Square opening for proper operation and appearance. • Cabinet front perpendicular to floor. • Level floor. If floor at front of opening is not level with floor at rear of opening, shims may be needed to level dishwasher. Note: Shims must be securely attached to floor to prevent their movement when dishwasher is being operated. If dishwasher will be left unused for a period of time or in a location where it may be subject to freezing , have it winterized by authorized service personnel. Make sure pipes, wires and drain hose are within the shaded area shown in diagram. See page 10 for dimensions. HELPFUL TIP: If the floor at the cabinet opening is uneven (example:tile flooring only part way into cabinet) you will need to take special care in measuring dimensions and in leveling dishwasher. 7