Haier HHV3330DBBB HHV3330 Manual - Page 12
Installing Hood
![]() |
View all Haier HHV3330DBBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
English Installing Hood GREEN GROUND SCREW GREEN GROUND SCREW 1. Hang hood from (4) Mounting Screws (from parts bag). Be sure to place a washer (included) onto each screw before driving in the screwGR.ESENlide GROUND hood towards wall until mounting screws are engaged in narroSwCReEnWd of (4) Keyholes. Tighten mounting screws securely. KEYHOLE (4) MKOEUYNHTOINLGE SCR(4E)W (4) 2. Replace bottom cover. MOUNTING SCREW KEYHOLE 3. Connect ductwork to hood. Use Duct Tape to(4()m4) ake joiDnUtsCTsecure and air tight. TAPE MOUNTING SCREW (4) DUCT TAPE DUCT TAPE 4. If you have a 4000 series model, install (2) dimmable PAR 20, 8W LED lights. Please note that the LED lights must be dimmable in order to adjust light settings. If you have a 3000 series model, install (2) PAR 20, 50W halogen lights. R20, 50W MAX. HALOGEN BULB -or- PAR20, 8W MAX. LED BULB R20, 50W MAX. HALOGEN BULB -or- PAR20, 8W MAX. LED BULB ! ! CAUTION: Bulbs may be hot! Refer to bulb packaging for further information. ! 5. Replace filters*, turn on power at service panel, and test range hood for proper operation. *If hood is to be installed Non-Ducted, install either the HEPA or charcoal filters (whichever are included with your model) in place of the aluminum filters that were removed earlier. The HEPA or charcoal filters can be found in a plastic bag labeled as such included with your unit. For Ducted installations, reinstall the aluminum filters. 11
![](/manual_guide/products/haier-hhv3330dbbb-hhv3330-manual-7edc194/12.png)