Haier HHV3330DBBB HHV3330 Manual - Page 8
Non-Ducted Installation - Skip to Preparing Electrical Connections, The following steps 7
 |
View all Haier HHV3330DBBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
English Non-Ducted Installation - Skip to "Preparing Electrical Connections" section. The following steps (7 thru 15) are for DUCTED INSTALLATION ONLY. 7. Remove Light Panel - held in place with (3) #8 screws and (2) #8 screws. Disconnect light assembly wire harness (white connector). (3) #8 Screws (2) #8 Screws Light Panel 8. Remove Air Chute - held in place with one (1) screw. NOTE: Be careful not to disconnect any wires. Air Chute 9. Remove Baffle from air chute. 10. Rotate and reinsert baffle into air chute (as shown) so that the baffle tabs fit all the way into slots in the air chute. An audible "click" will be heard when fully installed. 7 BAFFLE BAFFLE BAFFLE BAFFLE BAFFLE BAFFLE SLOTS TABS SLOTS TABS SLOTS TABS Support Fin
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
 |
 |
English
7
Non-Ducted Installation - Skip to “Preparing Electrical Connections”
section. The following steps (7 thru 15) are for DUCTED INSTALLATION
ONLY.
7.
Remove Light Panel - held in place with (3) #8 screws and (2) #8 screws.
Disconnect light assembly wire harness (white connector).
8.
Remove Air Chute - held in place with one (1) screw.
NOTE:
Be careful not to disconnect any wires.
9.
Remove Baffle from air chute.
10. Rotate and reinsert baffle into air
chute (as shown) so that the baffle
tabs fit all the way into slots in the
air chute. An audible “click” will
be heard when fully installed.
Light Panel
(3) #8 Screws
(2) #8 Screws
Air Chute
BAFFLE
SLOTS
BAFFLE
TABS
SUPPORT FIN