Haier HHV3330DBBB HHV3330 Manual - Page 9
Re-install air chute, re-connect wire harness, and replace light panel.
![]() |
View all Haier HHV3330DBBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English 11. Re-install air chute, re-connect wire harness, and replace light panel. NOTE: Be careful not to trap wires between support fin and light panel. 12. Remove appropriate Duct Knockout(s) from top or back of hood. TOP RECTANGULAR DUCT KNOCKOUT T(ORePmRoEvCeTfAoNr G3¼UL"AxR 1D0U"CVTerKtiNcaOl C&KfOorU7T"Round Discharge) (Remove for 3¼" x 10"Vertical & for 7"Round Discharge) SEMI-CIRCULAR DUCT KNOCKOUT SE(MReI-CmIoRvCeUfLoArR7D"RUoCuTndKNDOiscChKaOrgUeT) (Remove for 7"Round Discharge) SEMI-CIRCULAR DUCT KNOCKOUT S((RREeMemmIo-CovveIReCfofUor rL7A7"RR"RoDouUnuCdndTDKDisNicshOcahCragKregO)eU) T 13. Horizontal Discharge Only: Remove the Plate in front of the horizontal discharge knockout. Cut the Ties, remove the screw(1) located on top of unit, lift plate out, and discard plate. DO NOT REMOVE the Metal Strip held in place with Screws(2). TIES SCREWS(2) SCREW(1) METAL STRIP PLATE HOUSE WIRING 8 (120 VAC)
![](/manual_guide/products/haier-hhv3330dbbb-hhv3330-manual-7edc194/9.png)