Haier HLC1700AXS User Manual - Page 13
Water Connections
View all Haier HLC1700AXS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ENGLISH WATER CONNECTIONS IMPORTANT: Use the new water hoses supplied with the washer. Old hoses should not be used. 1. Check that a flat washer is present and firmly in place in each end of the water inlet hoses. Flat washers are pre-installed at the factory. NOTE: Do not insert additional washers into the water hoses. Pre-installed Flat Washer 2. Connect the elbow coupling end of the water hoses to the inlet valves on the washer. Then, connect the straight coupling end to the proper faucet. NOTE: The washer's inlet valves have metric threads. The elbow coupling end of the supplied water hoses have matching metric threads. 3. Connect the cold water faucet to the valve on the washer marked "C" and the hot water faucet to the valve marked "H". NOTE: Take care not to cross connect the hoses. C H 4. Check for hose connection leaks by fully opening the faucets. You may have to use pliers to tighten connections. NOTE: Do not over tighten hoses; this could cause damage to the washing machine's valves. 11