Haier HLC1700AXS User Manual - Page 33
Error Codes - error code fc
View all Haier HLC1700AXS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
ENGLISH TROUBLE POSSIBLE CAUSE Door will not open The temperature inside has not after completion of cooled down to a safe temperature. a dry cycle (Door lock is activated) POSSIBLE REMEDY Wait for the inside temperature to cool down. The cooling time can take several minutes. ERROR CODES ERROR CODE SYMPTOM E1 The washer cannot drain the water within 4 minutes. ACTION TO TAKE SOLUTION Stop running Clear the pump. Service Needed. E2 Cannot lock the door after 20s. Stop running Service Needed. After 8 minutes, the E4 selected water level has not been reached. Stop running Check plumbing and water hose connections. Service Needed F7 Motor circuit error Stop running Service Needed E8 The water is above the warning level. F9 Dryer sensor circuit problem. Stop running Service Needed Stop running Service Needed FA Water level sensor circuit problem. Stop running Service Needed FC No feedback signal from driver Stop running Service Needed unit. Fd The dryer heating is abnormal. Stop running Service Needed FE The dryer motor is abnormal. Stop running Service Needed Unb Unbalanced load Spin low speed and cancel Evenly distribute clothing drying in the wash basket. BEFORE YOU CALL FOR SERVICE IF NONE OF THE ABOVE SOLVES THE PROBLEM, CONTACT A QUALIFIED SERVICE TECHNICIAN. DO NOT TRY TO ADJUST OR REPAIR THE UNIT YOURSELF. 31