Haier HRF-370 User Manual - Page 28

refit the bottom plinth

Page 28 highlights

English To refit the door with the hinges on the opposite side, proceed as follows: 1. remove the cover plugs from the doors, revealing the fixing holes for the handles; 2. fit the refrigerator and freezer handles reversed on the right hand side of the doors (fig. B); 3. unscrew the pin of the top right hand hinge using a 5 mm socket wrench and refit it on the left hinge (fig. C); 4. reposition the refrigerator door and screw down the midd- le hinge on the left hand side, turned 180° (fig. D), being careful not to overtighten the screws; 5. reposition the freezer door and screw down the bottom hinge on the left hand side, after moving the pin to the left hand hole; 6. remove the cover plugs from the left hand side of the central crosspiece and position them on the right (fig. E); 7. refit the bottom plinth; 8. to align the doors precisely, adjust the middle hinge, moving it horizontally; once the doors are perfectly aligned, fully tighten the screws. Attention: once you have finished inverting the doors, check that the door seals adhere to the cabinet properly. If they do not, heat the loose section of door seal with a standard hairdryer, taking care not to burn it. - 10 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116

English
To refit the door with the hinges on the opposite side, proceed
as follows:
1. remove the cover plugs from the doors, revealing the fixing
holes for the handles;
2. fit the refrigerator and freezer handles reversed on the right
hand side of the doors (fig.
B
);
3. unscrew the pin of the top right hand hinge using a 5 mm
socket wrench and refit it on the left hinge (fig.
C
);
4. reposition the refrigerator door and screw down the midd-
le hinge on the left hand side, turned 180° (fig.
D
), being
careful not to overtighten the screws;
5. reposition the freezer door and screw down the bottom
hinge on the left hand side, after moving the pin to the left
hand hole;
6. remove the cover plugs from the left hand side of the cen-
tral crosspiece and position them on the right (fig.
E
);
7. refit the bottom plinth;
8. to align the doors precisely, adjust the middle hinge,
moving it horizontally; once the doors are perfectly aligned,
fully tighten the screws.
Attention:
once you have finished inverting the doors, check
that the door seals adhere to the cabinet properly. If they do
not, heat the loose section of door seal with a standard
hairdryer, taking care not to burn it.
- 10 -