Haier HWD100-FD756DD UM - Page 27

8-Troubleshooting GB Operation stops before completing wash cycle. Operation stops for a period of time. Water or electric failure. Appliance displays error code. Problem due to load pattern. Automatic adjustment of washing time. Spinning fails. Detergent is not a appropriate. ● Excessiveuseof detergent in man ually dosage. "Sm●art Dosing" function is not deac tiv●ated by using the manually dosing Washing programme duration will be adjusted. Unbalance of laundry. Degree of pollution does not agree with selected programme. cient. Check power and water supply. Consider display codes. Reduce or adjust load. Cancel programme and restart. Check detergent recommendations. Reduce amount ofdetergent. Deactivate the "Smart Dosing" function This is normal and doesn't affect functionality. Check machine load and laundry and run a spinning programme again. Select another programme. Choose the detergent according to the degree of pollution andaccording.to manufacturer Washing powder residues are on the laundry. Laundry has grey patches. The dispenser is level indicator is not ashing The wrong detergent/ fabric softener has been poured into the dispenser(s) Det ergent/ f abric softener has congealed in the dispensers. One or both "Smart Dosing" indicators are ashing Maximumload has been exceeded. Laundry was unevenly distributed in the drum. Insolubleparticles of detergent can remain as white spots on the laundry. Caused by fats suchasoils, creams or ointments. Is the drawer ap dirty? Has the detergent drawer been pushed incorrectly? The corresponding compartment i●s empty. The liquiddetergent or softener is too viscous. Detergent residues are clogging the dosing opening. Reduce loading. Loose the laundry. Perform extra rinse. Try to brushthe points from the dry laundry. Choose another detergent. Pretreat the laundrywith a special cleaner. Clean the detergent drawer. Empty and clean the dispenser. Fill up corresponding compartment. Empty andcleanthe drawer and Empty andcleanthe drawer and 27