Haier HWD100-FD756DD UM - Page 9

GB 3-Control panel 3.1 Display The display (Fig.3.11) shows following information: Washing time End time delay Error codes and service information During operation display will be deactivated after two minutes until programme selector is turned or a but ton is touched. Symbols of the display: Programme cycle indication Remaining ● operation time Status indication Door is locked Water inlet error Remaining delay time Time display ● Control panel is locked Door is unlocked Program progress 3.2 Programme selector By turning the knob (Fig.3.2) one of 16 programmes can be selected, related LED will light up, its default settings will be displayed. 3.3 "Start/Pause" button Press this button (Fig. 3.3) gently to start or inter rupt the currently displayed programme. During pro gramme selection and during operation its symbol is shining, or if interrupted blinking. 3.4 "Power" button Touch this button (Fig.3.4)gently to switch on, the dis play is shining,the LEDof the "Start/Pause" button is blinking.Touch it againfor about 2 seconds to switch ter a while machine will shut down automatically. 3.5 Function buttons The function butt●ons (Fig.3.5) enables additional op tions in the selected programme before programme start. The relate●d indicators abovethe buttons are dis played.Datacan● be set bypressingthe function button sequentialy. Smart Dosing Delay Speed Temp. Wash Rinse Dry I-time gramme, all options are disabled. 9