Haier HWM130-9188 User Manual - Page 11
Put in the laundries
View all Haier HWM130-9188 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Put in the laundries The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition . that can be washed or spinning in one time. One time washing quantity shall be lower than the rated capacity. The largest capacity of this machine is 13.0kg. The thickness, size, type of the cloth will influence the actual washing capacity. It is suitable for one time washing to put in reasonable amount of laundries and the laundries can be turned round in washing. Do not select above 8 water level for laundries small than 2.0kg, so as to avoid splashing of water. Usage of the detergent Control panel seat Bleach Inlet Liquid detergent box The usage and dose of the softener as per the specifications of softener. Before washing put the softener into the detergent box directly as indicated in the left figure The softener will put into the washer when the last rinsing. After that,please close the detergent box Refer to the following list for the usage of the detergent: selection of the water level,water quantity and dosage of detergent After the softener is put in, please don't place for a long time otherwise softener may solidify and cause flowing not smooth. Washing powder inlet Softener inlet Detergent box How to use liquid detergent Put the liquid detergent box on the left of the detergent box. See the above figure. Before washing put the liquid detergent into the liquid detergent box directly as indicated the above figure. The usage and dose of the liquid detergent as per the specifications of liquid detergent. How to use whitener Add water to stipulated level. Dilute the whitener with container, and then pour it into the liquid whitener inlet slowly. Laundries with color or pattern is not colorfast, thus not applicable. The whitener shall not touch laundries directly. See to the manual of whitener for the usage and dosage. For whitener in powder, dissolve it before use. How to use washing powder It is suggested to add washing powder into the box directly under fuzzy program and reserve program. Dissolve directly inside the washing machine: (not applicable for fuzzy and reserve program) 1.Add some water (select " 1 " water level). 2.Add washing powder. Run for about 30s to fully dissolve the Powder. Then push the "START/HOLD" button. 3.Put in laundries. Select suitable water level. Push the "START/HOLD" button again. Quick dissolving of washing powder: 1.Prepare warm water of 30 C and container. 2. Add washing powder while stirring to dissolve it completely. Please add suitable washing powder as per the laundries quantity, the set water level and water quantity. If you select "SPEEDY" program, it is suggested to use liquid detergent instead of washing powder to guarantee the washing effect. It is not recommended to use rich-foam washing powder. Washing powder with poor quality or long-time storage may get caked. Please clean the detergent box duly in usage. 9