Haier HWM130-9188 User Manual - Page 12

Usage of the Operation Buttons Explanation of Buttons TIMES 60 30 20 3 9 30 20 15 2 6 10 10 1 3 15 5 5 REFILL 1 AIR DRY SOAK WASH RINSE SPIN REMAIN (MINUTES) DELAY END(HOURS) DELAY END J I H G F E D C A B Indicator mode and meaning Off Flashing, indicating the running program On, indicating the program about to run or the selection mode Child lock function The function is intended for children safety and preventing the washing program from accidental changes by children. Push down the POWER button, set desired washing procedures, After setting ,push down the START/HOLD button, then hold the SPIN button and DELAY END button, The digitron displays"CL", The child lock function is activated. All of the buttons are locked and can not make selection . Release the child lock function :push down the SPIN button and DELAY END button at the same time for more 2 seconds .After three beep sound ,the child lock function is released. Open and close the top lid once to restart and go on working REMAIN (MINUTES) DELAY END(HOURS) Digital tube During working , it displays the remained reserve time (minute).In case of trouble, it displays the abnormal symbol (see to page 17) During reserve, it displays the remained reserve time (hour) Page 17 A "POWER" button Push the "POWER" button to switch on the power. Under power-on mode, push it to switch off the power. Push the "POWER" button to switch on the power. If the "START/HOLD"button is not pushed, the machine will switch off the power automatically after 5 minutes. B "START/HOLD" button After the power is switched on, press it to start the machine. During working, push it to pause. During pause, push this button to restart and go on working.