Haier HWM130-9188 User Manual - Page 6

Installation and adjustment Install the bottom plate After opening the package, please lean the washing machine gently down on soft items(like to welcloth,blanket,etc.).Install the bottom plate to the bottomof the machine with eight screws by across screwdriver, then lift the machine up gently. See to the figure: Back Bottom plate Front Screw Soft items Adjust the installation position The largest allowed slope of the base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Confirm it's horizontal: Hang the lead line to confirm if it is horizontal. Adjust the adjustable foot: 1.Your washer has 2 leveling legs, which are located on the front bottom corners. 2.After properly placing your washer in its final position, you can level your washer. 3.Leveling legs can be adjusted by turning them counterclockwise to raise your washer or turning them clockwise to lower your washer. the adjustable leg High Low WARNINGğLeveling of washer is very important to prevent vibration during spin. 4