Haier HWM60-78 User Manual - Page 9
Using process
View all Haier HWM60-78 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4 Use the operation buttons Using process Description of the function of buttons Mode and meaning of the indicators Flashing: indicate the running program On: indicate the program about to run, or indicate the selected mode Digital tube During sensing, it displays During operation of programs, it displays theremained time (minute) or remained times of the corresponding procedure 1 Preparation before washing Using process Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose. Minutes Minutes Times Minutes SOAK WASH RINSE SPIN SOAK button Push the soak button to set the soak procedure. During "NORMAL" and " JEAN" program,push the "SOAK" button to set different soak time (10, 20, 30, 40 minutes). During "FIBRE" and "COTTON" programs, push the soak button to select soak procedure, but the soak time can not change. During "QUICK ", "POSTHASTE", " SILK " and "WOOLLEN"programs, push the "SOAK" button, the machine have no reaction. WASH button Push the "WASH" button to set the wash procedure. During "NORMAL",and "JEAN"programs, push the wash button to set different wash time (from 0 to 25minutes) During "FIBRE" ,"COTTON" "WOOLLEN",and "SILK" programs, push the "WASH" button to select wash procedure, but the wash time cannot change. During " QUICK", " POSTHASTE"programs, push the wash button the machine have no reaction. RINSE button Push the rinse button to set the rinse procedure . During " JEAN" and "NORMAL" programs, push the "RINSE"button to set different rinse times ( 0, 1, 2, 3, 4 times) During "FIBRE" ,"COTTON" " WOOLLEN" and "SILK" programs, push the "RINSE" button to select rinse procedure, but the rinse times cannot change. During "QUICK" , "POSTHASTE" programs, push the " RINSE"button lthe machine has no reaction. During "NORMAL" program, the machine is set to save water program. If you push the rinse button before starting operation, it will change to water storage rinse program. SPIN button Push the "SPIN" button to set the spin procedure. During "NORMAL"and "JEAN"programs, push the "SPIN" button to set different spin time (from 0 to 9 minutes) During "FIBRE", "COTTON","WOOLLEN" and "SILK" programs, push the "SPIN" button to select spin procedure, but the spin time cannot change. During "QUICK" , "POSTHASTE" ,programs, push the spin button, the machine have no reaction. Pay attention to followings before washing the laundries Confirm if there's special requirement for the laundries. Clear the pocket. Fasten the buttons Take out the coins , and zippers. sand,hairpins etc. The quantity of the laundries shall not exceed the rated value. The big laundries like the jeans shall be put in loosely. When the pulsator is running ,the buttons of the laundries may cause noise. For the sake of discretion ,please put the laundries with buttons into other laundries. a. Check if the laundries are applicable for washing with machine. b. Divide the laundries with unfast color from other laundries. c. Put those laundries difficult to absorb water into water with hand. d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil, please apply detergent in advance, which can make it easier to remove the soil. e. For those laundries that may get lint ball and those with long fur, turn it over before putting in. f. Do not put those laundries polluted by chemicals directly into the washing machine.