Haier HWM65-918P User Manual - Page 10

4 Use the operation buttons a Description of the function of buttons Mode and meaning of the indicators Off On: indicate the program about to run,or indicate the selected mode or indicate the water level Flashing: indicate the running program, or indicate the selected mode or indicate the water level Child lock function Push and hold the"Rinse"button and"Water level"button, then push down the power on/off button. ,the digitron displays "CL".Then you can continue setting desired washing procedures.After setting ,push the "Start/pause" button, The child lock function is activated.All of the buttons are locked and can't make selection Release the "Rinse"button and"Water level"button for more than 3 seconds ,After a beep sound, the digitron displays "CL.",the child lock function is released. When using the child lock function,if the top cover is opened,the machine will stop and display E2 alarm .After 5 seconds the machine will automatic drainage .If you want to clear the E2 alarm ,please close the top cover and press the "Start/pause " button .The E2 alarm will be cleared. Remain time digitron It displays "--" during detecting. It displays total remained time during the running program(min). It displays I remained reserved time during reserved program(hours) . It displays abnormal symbol in abnormal Page 12 situation.(See to Page12) POWER ON/OFF button Push the power button to switch on the power When the power is on push it again to switch off the power . Push the power button to switch on the power ,if the start /pause button is not pushed the washing machine will automatically switch off the power after 5 minutes. Memory Standard Wool Tub Dry Normal Strong Soft Quick Mins Mins Mins Mins Times Times Times Mins Remaining Time Mins Mins Mins Delay Time 47L 38L 30L 22L 14L 52L 1st 43L 34L 2nd Rinse 26L 3rd 18L Power ON/OFF Program Wash Rinse Spin Delay Water level Reserve Water S Pause "WATER LEVEL" button The washing machine can detect the laundries automatically after detection, it will set the water level to suitable value among level 26L,34L,43L,52L automati -cally during the Normal,Memory and Standard program. You can also set water level by yourself.After the machine "START/PAUSE" button After the power is switched on,press it to start the machine. During working, push it to pause. During pause, push this button to restart and go on working is started, it will not set water level automatically. You shall push the "Start/Pause" button to make new setting. "PROGRAM" button If there's water inside the tub, the machine can not detect Program Applicable situation the laundries and will display water level 34L . If Quick program is selected, it will display water level 22L, Normal Washing the normal laundries the water level can be adjusted. If Tub Dry program is selected, the water level will not respond. During operation of wash , rinse and soak program, you Strong Soft Washing the bigger and heavier laundries Washing the woollen textiles or underwear can push down the water level button to add water. When you release the button, or it reaches the overflow water level, the machine will stop adding water. Quick Washing the laundries with small quantity and light soil The water level decided may be different from actual value because of the different moisture level of the laundries. The water level of woollen function can only be selected from 34L-52L. The water level of rinse function is one level higher than washing function.(Except the higest water level and hand chosen rinse water level) The common wash, the washer will set to Memory Custom program including wash, rinse, spin and water level automatically last time Standard Washing the normal laundries with less water Wool Tub Dry Washing the woollen textiles Drying the inner tub and the outer tub, which can avoid growing mildew