Haier HWM65-918P User Manual - Page 8

Preparation before washing

1.Connect the water inlet hose. Open

the water faucet.

2.Confirm that the washing machine is

earthed reliably.

Then

insert

the

power plug

into the receptacle. The

earth terminal shall not

link to gas

pipeline and faucet water pipeline.

3.Put up

the drain hose.

4.Slanting

or

uneven

ground

may

result

in

unstable working or abnormal noise. Please

make the machine stand horizontally.

a. Check if the laundries are applicable for washing with machine.

b.Please repair thedamaged cloth before washing in order to avoid

the situation worse

c. Divide the laundries that are not colorfast from other laundries.

d. Put those laundries difficult to absorb water into water with hand.

e. For those laundries with heavy soil, please first remove the dirt like

mud or dust. For the parts with heavy soil, please apply detergent on

them in advance, which can make it easier to remove the soil.

f. For those laundries that may get lint ball and those with long fur, tur

it over before putting in.

g.

Do not put those laundries polluted by chemicals into the washing

machine directly.

h.The foreign materials will

result in damage of the machine

0.7m<H

1.2m

Check if the

laundries has

special

requirement

on washing

pay attention to following before washing the laundries.

1

Preparation before washing

Clear the pocket.

Take out the coin,

sand,hairpins ect.

To aviod the

problem that

the washing

machine can

not be operated

normally.

Tie the long

strips; fasten

the button;

close zippers.

The quantity of

the laundries

shall not be too

large .Stretch

and loosen the

laundries before

putting them in

the tub.

When the pulsator

is running,the

buttons of the

laundries may cause

noise.For the sake

of discretion,please

put the laundries

with buttons into

other laundries.

Haier HWM65-918P User Manual - Page 8

Preparation before washing

Page 8 highlights