Haier HWM80-FD756DD User Manual - Page 10

18 Care and cleaning Care and cleaning 19 Pump filter Please check the pump filter regurarly and if the appliance - doesn´t drain the water, - doesn´t spin, - cause unusual noise while running. Water inlet valve and inlet valve filter To prevent blockage of water supply by foreign substances, clean inlet valve filter regularly. Warning! Scalding Risk! Water in the pump filter can be very hot! Before any action please ensure water has cooled down. 1. Turn off and unplug the electrical plug. 2. Open service flap.You can either use a coin or a screwdriver. 3. Provide a flat container to catch leach water. There could be bigger amounts! 4. Pull the drainhose out and hold its end above the container. 5. Take the sealing plug out of the drainhose. 6. After complete drainage, unscrew and remove counter clockwise the pump filter. 7. Remove contaminants and dirt. 8. Clean carefully pump filter, e.g. using running water. 9. Refix it thoroughly. 10. Close drainhose and push it back into the machine. 11. Close service flap Warning! Pump filter sealing has to be clean and unhurt. If the lid is not full tightened, water can escape. Period of disuse If the appliance is left idle for a longer period, pull out the electrical plug (1) and turn off water supply (2). Open the door to prevent formation of moisture and odours. Let door open while not used. Before next usage check carefully power cord, water inlet and drain hose. Make sure everything is properly installed and without leackage. 2 Choose the best Detergent Wool Mix Synthetic Cotton Express 15 min Delicate Universal - L/P L/P L/P L - Color - L/P L/P L/P L - Delicate - L - L Special L - Softener O O O O O O Detergent L Liquid P Powder o Optional - No Temperatur range in °C cold - 60 40 - 90 ----- If using liquid detergent, it is not recommended to activate the delayed start. The amount of detergent necessarily choose to package information! info: Modern washing detergents work at low temperatures.