Haier HWM80-FD756DD User Manual - Page 8

Smart Dosing

Get Haier HWM80-FD756DD PDF manuals and user guides View all Haier HWM80-FD756DD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

14 Daily use HWM100-FD756DD Loading the appliance Open the door and put in the laundry piece by piece. Don't overload. Check if you can put a hand upright on top of load. Close the door carefully. Selecting detergent Washing efficiency and performance is determined by used detergent quality. Use only machine wash approved detergent and if needed specific detergents, e.g. for synthetic and woolen fabric. Mind always detergent manufacturer recommendations. Adding detergent - "Smart Dosing" MAX MAX limit line Slide out the detergent drawer and put the required washing agents into the corresponding compartments. Important information: Smart Dosing is default setting. Accordingly to programme, load and water hardness an optimal dosage of washing agent will be automatically applied using reservoirs for liquid detergent and softener. To fill up open related flap of the detergent drawer and add a non concentrated product until the MAX limit line" is reached.At last push gently the drawer back. Daily use Select a programme To get the best washing results, select a programme which fits the degree of soiling and sort of laundry type. Please turn the programme knob to select the right programme. Select options Select required options (refer to "Control Panel"). Start wash programme Press "Start/Pause" button to start.Appliance operates according to present settings. Changes are only possible by cancelling wash programme.At programme cycle end End" is displayed, afterwards machine will shut off automatically. Interrupt - cancel wash programme To interrupt a running programme press gently "Start/Pause" button. Press it again to resume operation. To cancel a running programme and all its individual settings activate "Start/Pause" and then for about 3 seconds "On/Off". If there is a power cut when the machine is working, please press the On button for program to continue when power is reconnected. After washing Turn off the water supply and unplug the power cord. Open the door to prevent formation of moisture and odours. Let it open while not used. 15 HWM100-FD756DD HWM100-FD756DD HWM100-FD756DD

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
15
e
s
u
y
l
i
a
D
Select a programme
To get the best washing results, select a programme which
fits the degree of soiling and sort of laundry type. Please
turn the programme knob to select the right programme.
Select options
Select required options (refer to “Control Panel“).
Start wash programme
Press“Start/Pause“ button to start.Appliance operates
according to present settings. Changes are only possible by
cancelling wash programme.At programme cycle end
End“
is displayed, afterwards machine will shut off automatically.
Interrupt - cancel wash programme
To interrupt a running programme press gently“Start/Pause“
button. Press it again to resume operation.
To cancel a running programme and all its individual settings
activate “Start/Pause“ and then for about 3 seconds “On/Off“.
After washing
If there is a power cut when the machine is working, please
press the On button for program to continue when power
is reconnected.
Turn off the water supply and unplug the power cord.
Open the door to prevent formation of moisture and
odours. Let it open while not used.
14
Daily use
Loading the appliance
Open the door and put in the laundry piece by piece.
Don‘t overload. Check if you can put a hand upright on top
of load. Close the door carefully.
Selecting detergent
Washing efficiency and performance is determined by
used detergent quality. Use only machine wash approved
detergent and if needed specific detergents, e.g. for synthe-
tic and woolen fabric. Mind always detergent manufacturer
recommendations.
Adding detergent - “Smart Dosing“
Slide out the detergent drawer and put the required washing
agents into the corresponding compartments.
Important information:
Smart Dosing
is default setting.
Accordingly to programme, load and water hardness an
optimal dosage of washing agent will be automatically
applied using reservoirs for liquid detergent and softener.
To fill up open related flap of the detergent drawer and add
a non concentrated product until the
MAX limit line“ is
reached.At last push gently the drawer back.
MAX
MAX
limit line
HWM100-FD756DD
HWM100-FD756DD