Haier L42R3 User Manual - Page 8

Installation Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some different ways to connect your TV with different input sources. Connecting a VCR To avoid picture noise (interference), leave an adequate distance between the VCR and TV. C Select the input source with using the INPUT button   on the remote control, and then press / button to select the source, press OK button to confirm. External AV Source Setup How to connect q Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. q When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). Connection Option 1 Set VCR output switch to channel 3 or 4 and then tune the TV to the same channel number. Connection Option 2 A Connect the audio and video cables from the VCR's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to VCR, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). If you connect a S-VIDEO output from VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input. B Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) Camcorder Video Game Set How to use A Select the input source with using the INPUT button on the remote control. B Press CH+/- button to select the desired source. C Press OK button to confirm. D Operate the corresponding external equipment. Connecting a DVD player EN-7 TV LCD-TFT Owner's Manual