Hamilton Beach 702R User Guide - Page 4

!Y. HOW TO ASSEMBLE YOUR PROCESSOR Always position bowl and lock on base before putting blade or disc in position. Make .1, sure blade or disc is securely in place before using. 1. Place base on a clean, dry surface. 2. Make sure control switch is turned to OFF. 3. Place bowl onto base, with handle facing you. Move bowl back and forth slightly until it drops down into place. 4. Rotate the bowl counterclockwise until it locks into place. (Fig. A) When the unit is new, you may need to turn the bowl quite firmly to lock it. This tightness will decrease with repeated use. CQ Fig. A Top View Interlock 5. To put on blades: S-Blade: Place the S-blade into food processor shaft through hole in center of bowl. Turn blade slightly until flat edges on the two shafts line up and allow the blade to drop down completely onto the food processor shaft. Slicer/Shredder Disc: Place the blade shaft into food processor shaft through hole in center of bowl. Align hole in center of blade with hexagon shape on top of the blade shaft so that the blade drops down onto the blade shaft. (Fig. B) Handle blades carefully to avoid injury. Hold S-blade by the top of the plastic hub in the center; handle slicer/shredder disc by the edges. 6. Place cover on bowl with safety interlock tab to the right of the bowl handle. Turn the cover counterclockwise so that the interlock tab slides into the slot on the side of the motor housing. The unit will not operate unless it is completely locked into place in the slot. Turn until you hear the cover lock into place. THE MOTOR WILL NOT OPERATE UNLESS THE SAFETY INTERLOCK TAB IS COMPLETELY IN THE SLOT. ov OO OO CO