Harbor Freight Tools 62365 User Manual - Page 12

Safety Setup Manual Start 1. Turn the Fuel Valve Lever to its "OPEN" position. 1 2. Turn the Ignition Switch to its ON or RUN position. OFF ON 2 ON O I 3. Then, turn the engine Choke Lever to its "START" position. Set the Choke Lever in the "RUN" position when starting a warm engine. 3 4. Grip the Starter Handle of the Engine loosely and pull it slowly several times to allow the gasoline to flow into the Engine's carburetor. Then pull the Starter Handle gently until resistance is felt. Allow Cable to retract fully and then pull it quickly. Repeat until the engine starts. 4 Note: Do not let the Starter Handle snap back against the engine. Hold it as it recoils so it doesn't hit the engine. 5. Allow the Engine to run for several seconds. Then, if the Choke Lever is in the CHOKE position, move the Choke Lever very slowly to its RUN position. 5 Note: Moving the Choke Lever too fast could stall the engine. Operation Maintenance Page 12 For technical questions, please call 1-888-866-5797. Item 62365