Harbor Freight Tools 62365 User Manual - Page 2
Table of Contents
View all Harbor Freight Tools 62365 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Safety Setup Table of Contents Specifications 2 Safety 3 Setup 6 Operationr 10 Maintenances 17 Troubleshooting 22 Warranties 24 Parts Lists and Diagrams 26 Specifications Displacement Engine Type Engine Family Cooling System Fuel Type Capacity Engine Oil Type SAE Capacity Run Time @ 50% Load with full tank Sound Level Bore x Stroke Compression Ratio Rotation viewed from PTO (power takeoff - the output shaft) Shaft Shaft Keyway End Tapped Spark Plug Type Gap Valve Clearance Intake Exhaust Speed Idle Maximum Battery Required Hydraulic Oil Tire Inflation Digging Depth Maximum Digging Reach Spool Valve Pump Boom Travel Bucket Load Capacity Hitch Ball size 301cc Horizontal Single Cylinder 4-stroke, OHV, 9HP, Recoil Start ECRPS.3012GA Forced air cooled 87+ octane unleaded gasoline 1.72 Gallon 10W-30 above 32° F 5W-30 at 32° F or below 1 Quart 3 hours 106 dB 80 mm x 60 mm 8.2:1 Counterclockwise 1″ x 3.48″ 1/4″ (6.3 mm) 7/16 - 20 F6TC (Torch) 0.7 - 0.8 mm 0.15 ± 0.02 mm 0.20 ± 0.02 mm 1,740± 50 RPM 3,600 RPM 12V 18Ah 3.5 Gallons 65 PSI 5-1/2 and 7 Feet Deep 8 Feet Rated 10.6 GPM Rated 2.7 GPM 60° Left/Right 1.24 Cubic Feet 1-7/8" Diameter The emissions control system for this Engine is warranted for standards set by the U.S. Environmental Protection Agency and by the California Air Resources Board (also known as CARB). For warranty information, refer to the last pages of this manual. Operation Maintenance Page 2 For technical questions, please call 1-888-866-5797. Item 62365