Harbor Freight Tools 95275 User Manual - Page 7
Centralpneumatic®
View all Harbor Freight Tools 95275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Assembly/Mounting 1. Break in the new Air Compressor as follows: a. Turn the Power Switch off and unplug the unit. Insert a male coupler (sold separately) into the female Quick Coupler and fully open all regulators and valves. b. Plug in the Power Cord. c. Turn the Power Switch ON. d. Let the unit run for 30 minutes. Air will expel freely through the Coupler. e. Turn the Power Switch OFF. f. Unplug the Power Cord and remove the male coupler. 2. Connect a regulator valve, an inline shut off valve and a 1/4" NPT air hose to the Quick Coupler (all sold separately). The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. Note: An in-line shutoff ball valve is an important safety device because it controls the air supply even if the air hose is ruptured. The shutoff valve should be a ball valve because it can be closed quickly. 3. Depending on the tool which you will be using with this compressor, you may need to incorporate additional components, such as an in-line oiler, a filter, or a dryer (all sold separately), as shown on Figure A on page 8 and Figure B on page 9. Consult your air tool's manual for needed accessories. 0 z , 0i2an_ CENTRALPNEUMATIC® Item 95275 For technical questions, please call 1-888-866-5797. w c.) z < z w Iz- < 2 Page 7