Harman Kardon DVD 50 Owners Manual - Page 11

Remote Control Functions a Title Button: When a DVD is playing, press this button to display the disc's Title Select Menu. If the disc does not offer this function, a symbol ( ) will appear on the screen to indicate that there is only one title on the disc or that the disc does not allow this feature. This button is also used to activate the CD-Text display when a CD with CD-Text data is playing. (See p. 32 for more information.) b Power-On Button: Press this button to turn the DVD 50 on. c Status Button: When a disc is playing, pressing the button will display the Status Banner which contains information about the disc and enables you to change the functions. d Return Button: When viewing the menu display from a DVD disc, press this button to return to the previous menu screen. e Navigation Buttons: Press these buttons to change or select an item from the DVD 50's Status Banner or in the on-screen menu displayed by a DVD disc. f Previous Button: Press this button to move backward through the music tracks on a CD disc or the chapters on a DVD disc. g Play Button: Press this button to begin playback. If the disc tray drawer is open, it will automatically close when the button is pushed. Pressing the Play button when the unit is in the Standby mode will turn the unit on and begin playback of the last disc in use. h Reverse Search Button: Press this button to move backward through a CD or DVD at one of four speeds. Each press and release will increase the search speed, in the following order: R. Search x 2 ➔ R. Search x 4 ➔ R. Search x 16 ➔ R. Search x 100. Once you have selected the desired speed, release the button, and the disc will continue to search at fast speed. To resume normal playback, press the Play Button g/#. i Open/Close Button: Press this button to open or close the disc tray drawer. If the drawer is opened while a disc is still playing, playback will continue and discs not in use may be changed. If the drawer is opened while the unit is stopped, the disc that was playing will be presented at the front-center position of the tray. j Stop Button: Press this button once to place the disc in the Resume mode, which means that playback will stop; as long as the tray is not opened or the disc changed, DVD playback will continue from the same point on the disc when the Play Button g is pressed again. Resume will also work if the unit is turned off. To totally stop a disc, press the button twice. k Slow Play Buttons: When a DVD disc is playing, press these buttons to move forward or backward through the disc in slow speed. Each press of these buttons changes the slow-play speed in the following order: 1/16 Normal Speed ➔ 1/8 Normal Speed ➔ 1/4 Normal Speed ➔ 1/2 Normal Speed. To resume normal play, press the Play Button g/#. These buttons do not function when a CD is playing. l Random Button: Press this button to begin the playback of all tracks on a disc in random order. m Disc Skip Button: Press this button to move to the next available disc in the tray. n Numeric Buttons: Press these keys to enter data for sequential programming, to enter or change the access password for parental control, to enter a language code, or to respond to menu options presented by a disc. o Repeat Button: Press this button to select a Repeat-Play mode. Each press of the button shows the choice selected in either the on-screen Status Banner display or in the Repeat Indicators N. p Repeat A-B Button: Press this button once to begin the selection of a portion of a disc to be repeated. Press it again to choose the end point of the repeat-play selection. q Light Button: Press this button to activate the remote's backlighting so that the keys are visible in low-light conditions. r Check Button: This button is used to verify the contents of a programmed play list via the front panel Information Display. (See page 36 for more information about programming the DVD 50.) s Program Button: When the unit is stopped, press this button to display the program menu and enter a programmed play sequence. When a disc is playing, press this button to switch between normal play and programmed playback. t Clear Button: Press this button to remove the Status Banner or other displays from your video screen. This button is also used to clear items from Programmed Play lists. (See page 36.) u Zoom Button: When a DVD or VCD disc is playing, press this button to zoom the picture so that it is enlarged. There are six steps to the zoom function, each progressively larger. Press the button through each of the zoom stages to return to a normal picture. v Mark Button: Press this button to activate the Bookmark system. Once the button is pressed, you may save or recall a favorite spot in a program by pressing the Navigation e and Enter ` buttons. See page 37 for complete information on the Bookmark feature. w Step Buttons Button: When a DVD disc is playing, press these buttons to move forward or backward one frame at a time. Press the Play Button g/# to resume normal play. These buttons do not function when a CD is playing. x Pause Button: Press this button to stop the disc in use. To resume playback, either press the Pause button again or press the Play Button g/#. y Forward Search Button: Press this button to move forward through a CD or DVD at one of four speeds. Each press and release will increase the search speed, in the following order: F. Search x 2 ➔ F. Search x 4 ➔ F. Search x 16 ➔ F. Search x 100. Once you have selected the desired speed, release the button and the disc will continue to search at fast speed. To resume normal playback speed, press the Play Button g/#. z Next Button: Press this button to move forward through the music tracks on a CD disc or the chapters on a DVD disc. ` Enter Button: Press this button to select the item that is highlighted in the DVD 50's Status Banner or in the on-screen menu displayed by a DVD disc. 11 REMOTE CONTROL FUNCTIONS