Harman Kardon DVD 50 Owners Manual - Page 28
Playback Basics
![]() |
View all Harman Kardon DVD 50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Playback Basics for All Formats Basic playback with the DVD 50 involves functions similar to those you may be familiar with for conventional CD players or changers: s Turn the unit on by pressing in the Power Switch 1/b. s If there are discs already loaded in the unit, the last disc to be played will automatically begin playing. If the disc was stopped using the Resume function, playback will begin from the point where it was stopped. If the disc was stopped by pressing the Stop Button !/j twice, the disc will begin playing from its beginning. s Load any new discs as indicated in the previous section. s After loading discs, press the Open/Close Button 9/i to begin play. Playback Features for DVD and CD Discs: s To move to the next disc in the unit, press the Disc Skip Button 7/m. s To select a specific disc in the player, press the Direct Access Button 6 corresponding to the slot where that disc is loaded. s To momentarily pause playback and freeze the current picture frame on a DVD, press the Pause Button @/x. To resume playback after pressing the Pause button, press the Play Button #/g. s To move forward or backward through the tracks on a CD or the chapters on a DVD, press the Skip Forward/Reverse Button ) on the front panel or the Previous/ Next Buttons f/z on the remote. s To move forward or backward through the DVD or CD disc being played at fast speed, press the Search Forward/Reverse Buttons 8/h/y. Once one of these buttons is pressed, the fast search will continue until the Play Button #/g is pressed. Note that the fast-play speeds vary for CD discs and DVDs. For DVD playback, there are four fast-play speeds. Each press of the Search Forward/Reverse Buttons 8/h/y will cycle to the next speed in the following order: s In Fast Search x2, both segments of the ‹‹ or ›› Playback Mode Indicator S will light steadily. s In Fast Search x4, the outside segment of the ‹‹ or ›› Playback Mode Indicator S will flash and the inside segment will remain steadily lit. s In Fast Search x16, the inside segment of the ‹‹ or ›› Playback Mode Indicator S will flash and the outside segment will remain steadily lit. s In Fast Search x100, both segments of the ‹‹ or ›› Playback Mode Indicator S will flash. Note that there will be no audio playback during fast-forward or reverse-play of DVD discs. This is normal for DVD, as A/V receivers and surround processors cannot process the digital audio streams during fast-play modes; audio will be heard during fast-play of conventional CDs. For CD playback, there are three fast-play speeds. Each press of the of the Search Forward/Reverse Buttons 8/h/y will cycle to the next speed in the following order: s In Fast Search x2, both segments of the ‹‹ or ›› Playback Mode Indicator S will light steadily. s In Fast Search x4, the outside segment of the ‹‹ or ›› Playback Mode Indicator S will flash and the inside segment will remain steadily lit. s In Fast Search x8, the inside segment of the ‹‹ or ›› Playback Mode Indicator S will flash and the outside segment will remain steadily lit. NOTE: Fast Search Plus is not available when MP3 discs are playing. When playing a DVD disc, you may move forward or backward through the program being played in one of four speeds by pressing the Slow Play Buttons k on the remote. Each press of the buttons will move to the next speed in the following order: s In the 1/16th Speed Slow mode, both segments of the ‹‹ or ›› Playback Mode Indicator S will flash. s In the 1/8th Speed Slow mode, the inside segment of the ‹‹ or ›› Playback Mode Indicator S will flash and the outside segment will remain steadily lit. s In the 1/4 Speed Slow mode, the outside segment of the ‹‹ or ›› Playback Mode Indicator S will flash and the inside segment will remain steadily lit. s In the 1/2 Speed Slow mode, both segments of the ‹‹ or ›› Playback Mode Indicator S will remain steadily lit. Note that there is no audio playback during slow-forward or -reverse play of DVD discs. This is normal for DVD, as A/V receivers and surround processors cannot process the digital audio streams during slow modes. Slow play is not available for CD discs. s When a camera icon appears on the screen, and the Angle Indicator H flashes, this is your indication that there is multiple-angle information on the disc being played. To change the angle, press the Angle Button 30 until the desired angle view appears. An on-screen banner message will appear to indicate the angle view in use. To illuminate the buttons on the remote control so that they may be seen in low-light conditions, press the Light Button q. 28 PLAYBACK BASICS
![](/manual_guide/products/harman-kardon-dvd-50-owners-manual-757b867/28.png)