Harman Kardon GPS-500 Owners Manual - Page 18

To use the MTP mode, you must have a PC that is running the Windows® XP operating system (Service Pack 2 or higher) and has Windows Media Player 10 or higher installed. TO TRANSFER FILES TO THE GPS-500 IN MTP MODE: 1. Insert an SD card into the GPS-500's SD card slot (see page 4). 2. Make sure the USB cable is disconnected from the GPS-500. 3. Set the GPS-500's USB mode to MTP (see page 17). 4. Connect the GPS-500 to your computer's USB hub (right). 5. Launch Windows Media Player. 6. Locate the files you want to transfer. 7. Select Windows Media Player's SYNC mode (see below). 8. Drag the files you want to transfer into the Windows Media Player SYNC LIST (see below). 9. Select START SYNC and wait for the process to finish (see below). 7. Select SYNC Mode 8. Drag Title to Sync List 9. Select START SYNC NOTE: Your Windows Media Player screen may look different from the example. Once the Sync is finished, you can unplug the GPS-500 from your computer and watch or listen to the files on it. (See Listening to Music, on page 20, and Watching Videos, on page 21). guide + play™ GPS-500 User Manual 18