Harman Kardon TD302 Owners Manual - Page 7
Controls, Functions
![]() |
View all Harman Kardon TD302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
CONTROLS AND FUNCTIONS DI ® RECORD BUTTON (REC) Press this button and the PAUSE button simultaneously to provide the record standby mode. The RECORD and PAUSE indicators wil l illuminate. Recording starts when the PLAY button is pressed. ® RECORD INDICATOR For indication that the tape is being recorded. PLAY BUTTON (PLAY) Press this button to start playback. e PAUSE BUTTON (PAUSE) Press this button to temporarily stop playback or recording. This button also activates the record standby mode when pressed simultaneously with the RECORD button. PAUSE INDICATOR For indication that the pause mode has been activated. e FAST FORWARD BUTTON (F.FWD) Press this button to quickly advance the tape in the same direction as it is played. flp RECORD MUTE BUTTON (REC MUTE) This button allows you to create a silent segment of tape at any time whi le recording. The button is a momentary contact type and wil l not lock in the depressed position. The record mute feature wil l only operate while the button is held in the depressed position. 01) PEAK LEVEL METER The level of the signal being recorded or played is displayed clearly on this meter. DOLBY NR SWITCH (NR) Depress this switch for recording or playback using the Dolby NR system. The green DOLBY NR indicator (for Btype) or the amber one (for C-type) illuminates according to the DOLBY NR TYPE selector position. Press the switch again to turn off the Dolby NR system. GO DOLBY NR TYPE SELECTOR (type) For selection of the Dolby B- or C-type NA system. Depress this switch to select the Dolby C-type NR system. Press it again to select the Dolby B-type system. e DOLBY NR INDICATOR For indication that Dolby B or C noise reduction circuitry is activated. ® SUB-PANEL DOOR Press the upper right part of the SUB-PANEL DOOR and it wil l release. Then open the door with your hand to access the sub-panel. e) MPX FILTER SWITCH (mpx filter) The MPX filter is a high frequency filter that has very little effect below 1 6kHz, but has 30dB attenuation at 1 9kHz, the frequency of the FM stereo pilot signal. Depress and release this switch (to the "on" position) when recording from an FM stereo tuner or receiver. However, to appreciate the ultrawideband frequency response of the TD302, depress this switch (to the "off" position) when recording all other sources, such as a turntable, tape deck, etc. ® INPUT LEVEL CONTROL KNOB (INPUT LEVEL) This knob adjusts the record level of the input signal. See the "Recording Level Adjustment" section on page 7. fp BIAS FINE TRIM KNOB (BIAS FINE TRIM) For precise adjustment of the bias used during recording. See the "Bias Fine Trim Feature" section on page 8. @INPUT BALANCE CONTROL KNOB (INPUT BALANCE) This knob is used to restore the input level balance when the levels of the right and left channels are extremely different or to deliberately upset the input level balance as you like. Usually, it is set at the center. Turn it to the clockwise, the recording level of left channel is decreased. Turn it to the counterclockwise, the recording level of right channel is decreased. 6
![](/manual_guide/products/harman-kardon-td302-owners-manual-cc9aab3/7.png)