HealthRider H15x Bike Enc Manual - Page 15
HOW TO ADJUST THE DRIVE BELT, shields and the pedals.
View all HealthRider H15x Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
HOW TO ADJUST THE DRIVE BELT If you can feel the pedals slip while you are pedaling, even when the resistance is set at the highest level, the drive belt may need to be adjusted. To adjust the drive belt, the pedals and the shields must be removed. Use an adjustable wrench to remove the pedals. 29 To remove the left pedal, turn the left pedal clock- wise; to remove the right pedal, turn the right pedal counterclockwise. Next, remove all of the screws from both shields. Then, 28 carefully remove the shields. 48 Next, loosen the M8 Locknuts (43) on each side of the Flywheel (29). Then, tighten the M5 Nuts (48) on each side of the Flywheel, until the Drive Belt (28) is properly tightened. 43 Finally, tighten the M8 Locknuts (43), and reattach the shields and the pedals. 15