HealthRider H15x Bike Enc Manual - Page 6
ASSEMBLY, Attach the Rear Stabilizer 10 to the Frame 1
View all HealthRider H15x Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • In addition to the included tool(s), assembly requires the following tool(s): one Phillips screwdriver one adjustable wrench one pair of pliers Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.iconservice.ca/CustomerService/ registration and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Service • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call Customer Service (see the front cover of this manual) and register your product. 2. Identify the Rear Stabilizer (10), which has a leveling dial on each end. 2 Set a sturdy piece of packing material under the rear of the Frame (1). Have a second person hold the Frame to prevent it from tipping while you complete this step. Attach the Rear Stabilizer (10) to the Frame (1) with two M8 x 92mm Screws (50) and two M8 Curved Washers (51). Remove the packing material. 10 51 50 6 1 Leveling Dial