HealthRider H79t Treadmill English Manual - Page 12

14. Raise the Frame (57) to the position shown. 14 Have a second person hold the Frame until this step is completed. Orient the Storage Latch (58) so that the large barrel and the latch knob are oriented as shown. Attach the lower end of the Storage Latch (58) to the Base (91) with a 3/8" x 2" Bolt (3) and a 3/8" Nut (12). Attach the upper end of the Storage Latch (58) to the bracket on the Frame (57) with a 3/8" x 1 3/4" Patch Bolt (6) and a 3/8" Nut (12). Note: It may be necessary to move the Frame (57) back and forth to align the Storage Latch with the Base. 57 12 6 Latch Knob 58 Large Barrel 15. Attach the Left and Right Rear Feet (41, 61) to the Frame (57) as shown with four #8 x 1/2" Screws (1). Lower the Frame (57) (see HOW TO LOWER THE TREADMILL FOR USE on page 21). 15 41 1 91 12 3 57 61 1 16. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 23 and 24). 12