HealthRider H79t Treadmill English Manual - Page 9
Attach the Pulse Bar Top 86 to the Pulse Bar
View all HealthRider H79t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. Identify the Left and Right Handrails (81, 82). Attach the Handrails to the Pulse Bar Bottom 6 (87) with four 3/8" x 3/4" Patch Bolts (9). Start all four Patch Bolts, and then tighten each of them. 87 9 81 9 82 7. Hold the Pulse Bar Top (86) near the Pulse Bar Bottom (87). Insert the pulse wire from the Pulse 7 Bar Top into the Left Handrail (81) and pull it out of the large hole in the Pulse Bar Bottom. 86 1 Attach the Pulse Bar Top (86) to the Pulse Bar Bottom (87) with seven #8 x 1/2" Screws (1). Be 1 careful not to pinch the pulse wire. Start all seven Screws, and then tighten each of 1 1 them. 87 81 Pulse Wire 1 8. Hold the pulse bar assembly near the Left and 8 Right Uprights (88, 89). Insert the pulse wire on the pulse bar assembly through the rectangular hole in the top of the Left Upright and pull it out of the front of the Left Upright. Attach the pulse bar assembly to the Uprights (88, 89) with four 3/8" x 4 1/2" Patch Bolts (5) and four 3/8" Star Washers (13); do not fully tighten the Patch Bolts yet. Remove the wire tie from the Upright Wire (77). Pulse Bar Assembly Pulse Wire 13 Wire Tie 5 89 77 13 5 88 9