HP 10/100 3Com 3C905B-TX 3COM LAN cards (D6500A, D6509A), User Guide - Page 11
Supported Platforms, NT Service Pack, Operating System Master Diskettes, C:\I386\SP - network driver download
View all HP 10/100 3Com 3C905B-TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
1 Introduction Installation Requirements The driver installation diskettes contain drivers for other network operating systems. For more information on installing these drivers, refer to the readme files provided on the installation diskettes. The latest drivers are available on HP's Web site at: http://www.hp.com/go/vectrasupport Supported Platforms To find out on which PCs you can install a 3C905B-TX card, go to the following HP Web sites: • For Vectra PCs http://www.hp.com.go/vectraaccessories • For Kayak PC Workstations http://www.hp.com.go/kayakaccessories NT Service Pack If an NT service pack is already installed on the PC, it must be reinstalled after the Network Interface Card (NIC) and software is installed. When using the HP preloaded NT 4.0 software, the latest service pack can be found in the C:\I386\SPx directory. On some platforms you also need to reinstall the video drivers. Check your PC documentation for more details. Operating System Master Diskettes During the software installation you will need to have your operating system master diskettes or CD-ROM available. When using HP preloaded operating system software, the master diskettes can be found in the following directories: • C:\I386 (Windows NT 4.0) • C:\WINDOWS\OPTIONS\CABS (Windows 95) NOTE Make sure that you are running the latest BIOS for your PC, even if your PC is new. You can download the latest BIOS version from the HP's Support Web site at: http://www.hp.com/go/vectrasupport English 11