HP 10/100 3Com 3C905B-TX 3COM LAN cards (D6500A, D6509A), User Guide - Page 20
Installing the NetworkDriver, Windows 95, If Windows 95 does not detect the 3C905B-TX NIC
View all HP 10/100 3Com 3C905B-TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3 Installing the Network Driver Installing the Network Driver Installing the Network Driver This chapter describes how to install the network driver that completes your PC connection to the network. The 3C905B-TX software is installed with the network driver. Instructions are provided for Windows 95, Windows NT, and NetWare DOS client and server driver installation. Table 1 provides a complete list of supported drivers and text files that describe how to install them. Go to the section your MIS department recommends and follow the instructions to install the network driver on your PC. You can obtain the latest network drivers on HP's Web site at: http://www.hp.com/go/vectrasupport Windows 95 This section describes how to install the network driver when your PC is running Windows 95. This driver can be used in Microsoft and NetWare environments, and instructions are included for both. Do not use the AutoLink software to install the driver if you are running Windows 95. Follow these steps to install the network driver in a PC running Windows 95: 1 Install the 3C905B-TX NIC and connect it to the network, as described in Chapter 2. 2 Restart the PC. Windows 95 automatically detects the NIC in the PC. If Windows 95 does not detect the 3C905B-TX NIC, see Chapter 4,"Troubleshooting." 20 English