HP 1000-1100 HP 1000 Notebook PC and Compaq Presario CQ45 Notebook PC - Mainte - Page 102
straight up, and then remove it., Lift the processor
View all HP 1000-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
● System board (see System board on page 82) ● Fan/heat sink assembly (see Fan/heat sink assembly on page 87) To remove the processor: 1. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn counterclockwise (2) until you hear a click. 2. Lift the processor (3) straight up, and then remove it. NOTE: The gold triangle (4) on the processor must be aligned with the triangle icon embossed on the processor socket when you install the processor. Reverse this procedure to install the processor. 94 Chapter 4 Removal and replacement procedures
●
System board (see
System board
on page
82
)
●
Fan/heat sink assembly (see
Fan/heat sink assembly
on page
87
)
To remove the processor:
1.
Use a flat-bladed screw driver
(1)
to turn the processor locking screw one-half turn
counterclockwise
(2)
until you hear a click.
2.
Lift the processor
(3)
straight up, and then remove it.
NOTE:
The gold triangle
(4)
on the processor must be aligned with the triangle icon embossed
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
94
Chapter 4
Removal and replacement procedures