HP 1000-1100 HP 1000 Notebook PC and Compaq Presario CQ45 Notebook PC - Mainte - Page 93
Optical drive cable, Display assembly see
View all HP 1000-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Optical drive cable Description Optical drive cable (includes cable bracket) Spare part number 685084-001 Before removing the optical drive cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38), and then remove the following components: ● WLAN module (see WLAN module on page 46) ● Hard drive (see Hard drive on page 50) ● Keyboard (see Keyboard on page 56) ● Top cover (see Top cover on page 59) ● Speakers (see Speakers on page 67) ● USB board (see USB board on page 69) ● Power connector cable (see Power connector cable on page 71) ● Display assembly (see Display assembly on page 73) ● System board (see System board on page 82) Remove the optical drive cable: 1. Remove the Phillips PM2.0×3.0 screw (1) that secures the optical drive cable and cable bracket to the base enclosure. 2. Remove the cable bracket (2) and cable (3). Component replacement procedures 85