HP 1000-1100 HP 1000 Notebook PC and Compaq Presario CQ45 Notebook PC - Mainte - Page 69
until the left and right sides disengage from the, base enclosure.
View all HP 1000-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
6. Release the ZIF connectors to the power button board cable (1) and the TouchPad button board cable (2), and then disconnect the cables from the system board. 7. Remove the two Phillips PM2.5×6.0 screws that secure the top cover to the computer. 8. Lift the rear edge of the top cover (1) until the left and right sides disengage from the base enclosure. Component replacement procedures 61
6.
Release the ZIF connectors to the power button board cable
(1)
and the TouchPad button board
cable
(2)
, and then disconnect the cables from the system board.
7.
Remove the two Phillips PM2.5×6.0 screws that secure the top cover to the computer.
8.
Lift the rear edge of the top cover
(1)
until the left and right sides disengage from the
base enclosure.
Component replacement procedures
61