HP 1000-1100 HP 1000 Notebook PC and Compaq Presario CQ45 Notebook PC - Mainte - Page 82
computer components., To remove the display assembly in its entirety
View all HP 1000-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
To remove the display assembly in its entirety: 1. Disconnect the display panel cable (1) from the system board. 2. Release the wireless antenna cables from the clips (2) built into the base enclosure. CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 3. Remove the five Phillips PM2.5×6.0 screws (1) that secure the display assembly to the computer. 74 Chapter 4 Removal and replacement procedures
To remove the display assembly in its entirety:
1.
Disconnect the display panel cable
(1)
from the system board.
2.
Release the wireless antenna cables from the clips
(2)
built into the base enclosure.
CAUTION:
Support the display assembly when removing the following screws. Failure to
support the display assembly can result in damage to the display assembly and other
computer components.
3.
Remove the five Phillips PM2.5×6.0 screws
(1)
that secure the display assembly to the
computer.
74
Chapter 4
Removal and replacement procedures