HP 100B Maintenance & Service Guide HP 100B All-in-One - Page 15
Computer Setup—Storage, Option, Description, Device, Configuration, Hard Disk, CD-ROM - all in one drivers
View all HP 100B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Computer Setup-Storage NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 2-3 Computer Setup-Storage Option Device Configuration Storage Options Description Lists all installed BIOS-controlled storage devices. When a device is selected, detailed information and options are displayed. The following options may be presented: Hard Disk: Size, model, firmware, serial number, connector color, SMART, emulation type. Emulation type has the following choices: ● None (prevents BIOS data accesses and disables it as a boot device) ● Hard Disk (treated as a hard disk) CD-ROM: Model, firmware, serial number. No emulation options available. SATA Emulation Allows you to choose how the SATA controller and devices are accessed by the operating system. There are two supported options: AHCI and IDE. AHCI (default option) - Allows operating systems with AHCI device drivers loaded to take advantage of more advanced features of the SATA controller. IDE - This is the most backwards-compatible setting of the two options. Operating systems usually do not require additional driver support in IDE mode. NOTE: The AHCI device driver must be installed prior to attempting to boot from an AHCI volume. If you attempt to boot from an AHCI volume without the required device driver installed, the system will crash (blue screen). Computer Setup (F10) Utilities 7