HP 100B Maintenance & Service Guide HP 100B All-in-One - Page 41
Feet, Preparing to Disassemble the Computer, on Rear Cover
View all HP 100B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Feet Description Foot, right Foot, left Spare part number 646784-001 646785-001 Each foot is connected to the computer with one screw. The top of the foot is positioned under the display panel bracket. You must slide the foot out from under the bracket to remove it, and place it back under the bracket to install it. To remove the feet: 1. Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 29). 2. Remove the rear cover (see Rear Cover on page 30). 3. For each foot, remove the Torx T15 3.0x6.0 screw (1) that secures the foot to the computer. 4. Slide the foot away out from under the display panel bracket and away from the computer (2). Figure 6-5 Removing the feet (right foot shown) To replace the feet, reverse the removal procedures. When reinstalling a foot, make sure you slide the top of the foot under the display panel bracket before securing the screw. Feet 33