HP 100B Maintenance & Service Guide HP 100B All-in-One - Page 92
Control panel message, Description, Recommended action, ME Firmware Version request failure
View all HP 100B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Table A-1 Numeric Codes and Text Messages (continued) Control panel message Description Recommended action 2201-MEBx Module did not checksum correctly Memory error during POST execution of the Management Engine (ME) BIOS Extensions option ROM. 1. Reboot the computer. 2. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 2202-PMM Deallocation Error during MEBx cleanup Memory error during POST execution of the Management Engine (ME) BIOS Extensions option ROM. 1. Reboot the computer. 2. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 2211-Memory not configured correctly for proper MEBx execution SODIMM1 is not installed. Make sure there is a memory module in the SODIMM1 socket and that it is properly seated. 2212-USB Key Provisioning failure writing to device USB device used for USB key provisioning will not allow BIOS to update provision file properly. 1. Try a different USB key device for provisioning. 2. If the error persists, update to the latest BIOS version and ME firmware version. 3. If the error still persists, replace the system board. 2217-ME Firmware Version request failure ME firmware is not properly responding to BIOS query for version information. 1. Reboot the computer. 2. If the error persists, update to the latest BIOS version and ME firmware version. 3. If the error still persists, replace the system board. 2218-ME Firmware Version should be updated ME firmware must be updated to match current functionality contained in the system BIOS. 1. Update to the latest ME firmware version. 2. If the error persists and system BIOS has been recently updated, restore previous system BIOS version. 3. If the error still persists, replace the system board. 84 Appendix A POST Error Messages