HP 10642 HP Ground Bonding Rack Option Kit Installation Guide - Page 5

From the system chassis rail to the front door with a grounding lug - rack

Get HP 10642 PDF manuals and user guides View all HP 10642 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

2. Insert an M6 T-25 Torx screw through one end of a 15.24-cm (6-in) grounding strap, and insert it in the second hole below the upper front door hinge on the vertical frame member of the rack. Tighten the screw. 3. Replace the rack front door. 4. Insert a T-25 Torx screw through the other end of the same grounding strap, and insert it in the hole on the rack front door. Tighten the screw. From the system chassis rail to the front door (with a grounding lug): 1. Insert a T-25 Torx screw through one end of a 36.83-cm (14.5-in) grounding strap, and secure it to the system chassis rail. 2. Place the other end of the same grounding strap over the grounding lug on the front door. 3. Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the front door and tighten. From the system chassis rail to the right rear door: 1. Insert a T-25 Torx screw through the end of a 36.83-cm (14.5-in) grounding strap, and secure it to the system chassis rail. Installing the HP Ground Bonding Rack Option Kit 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
Installing the HP Ground Bonding Rack
Option Kit 5
2.
Insert an M6 T-25 Torx screw through one end of a 15.24-cm (6-in) grounding strap, and insert it in
the second hole below the upper front door hinge on the vertical frame member of the rack. Tighten
the screw.
3.
Replace the rack front door.
4.
Insert a T-25 Torx screw through the other end of the same grounding strap, and insert it in the hole
on the rack front door. Tighten the screw.
From the system chassis rail to the front door (with a grounding lug):
1.
Insert a T-25 Torx screw through one end of a 36.83-cm (14.5-in) grounding strap, and secure it to
the system chassis rail.
2.
Place the other end of the same grounding strap over the grounding lug on the front door.
3.
Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the front
door and tighten.
From the system chassis rail to the right rear door:
1.
Insert a T-25 Torx screw through the end of a 36.83-cm (14.5-in) grounding strap, and secure it to
the system chassis rail.