HP 10647 10842 Rack Reference Guide - Page 57
Release the cable access panel hinges 2 and then unscrew the two, Pull the handle to open the doors 1.
View all HP 10647 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Installing Components in the Rack 4. Remove the cable access panel, if present: NOTE: The cable access panel can be removed from the left rear door. a. Rotate the handle to the right. b. Pull the handle to open the doors (1). c. Release the cable access panel hinges (2) and then unscrew the two fasteners (3). Retain the fasteners and hinge brackets for later steps. d. Remove the cable access panel from the hinge bracket (4). Store the panel in an upright position, taking care to protect it from damage. 3 1 3 4 2 Figure 4-19: Removing the cable access panel HP 10842 Rack Reference Guide 4-23
Installing Components in the Rack
HP 10842 Rack Reference Guide
4-23
4.
Remove the cable access panel, if present:
NOTE:
The cable access panel can be removed from the left rear door.
a.
Rotate the handle to the right.
b.
Pull the handle to open the doors (1).
c.
Release the cable access panel hinges (2) and then unscrew the two
fasteners (3). Retain the fasteners and hinge brackets for later steps.
d.
Remove the cable access panel from the hinge bracket (4). Store the panel in
an upright position, taking care to protect it from damage.
1
2
3
3
4
Figure 4-19:
Removing the cable access panel