HP 10842 10842 Rack Reference Guide - Page 20
Monitor, Server Console Switch, Rack Option Baying Kit, Sidewall Panels, Stabilizing Feet
View all HP 10842 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Configuration Factors • Monitor-The monitor requires installation of a Monitor/Utility Shelf Rack Option Kit unless you are using a rack-mountable flat panel monitor. • Server Console Switch-If a switch box is configured, use the CPU-to-Switch cable included with the server. The standard distance between the switch box and the keyboard, monitor, and/or mouse can vary by 3-, 7-, 12-, 20- and 40-foot (91.44-, 213.36-, 365.76-, 609.6-, and 1219.2-cm) lengths. Optional Plenumrated KVM cables are available in 20- and 40-foot (609.6- and 1219.2-cm) lengths. NOTE: National Electrical Regulations governing the installation of building wiring require that an appropriate cable, meeting fire-safety standards, be used any time cabling is routed: • Through an overhead drop-ceiling • Under a computer room's raised flooring • From room to room • From floor to floor Be sure that the cable jacket or sleeving is made of material that does not burn easily and does not exude toxic fumes when exposed to heat. Be sure that the cable you have selected is appropriate for your installation site. If you require U.S. plenum-rated (CL2P) cable, please contact your local HP authorized reseller to obtain the following options: • 149363-B21-20-foot (609.6-cm) plenum cable • 149364-B21-40-foot (1219.2-cm) plenum cable • Rack Option Baying Kit-The number of baying kits needed to join a series of racks is one less than the number of racks in the suite. • Rack Option Offset Baying Kit-This kit joins multiple racks of different series with the same height but different depths. • Sidewall Panels-Only one set of sidewall panels is required for each row of bayed racks. • Stabilizing Feet-A stand-alone rack requires stabilizing feet. 2-4 HP 10842 Rack Reference Guide