HP 10842 10842 Rack Reference Guide - Page 58
Distribution Unit PDU., connect the power cords to a main power switch such as a properly rated Power
View all HP 10842 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Installing Components in the Rack WARNING: To reduce the risk of electrical shock or damage to the equipment: • Do not disable the power cord grounding plug. The grounding plug is an important safety feature. • Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. • When using an optional power distribution device, make sure that the ground integrity is maintained for each connection by plugging each component into a reliable grounded outlet. CAUTION: To reduce the risk of damage to the equipment, verify that all AC voltage selector switches are set to match your local AC line voltage (115V or 230V). If the AC voltage selector switches are not properly set, your components will be damaged when power is supplied. 5. After all cables and power cords have been routed to their power destinations, connect the power cords to a main power switch such as a properly rated Power Distribution Unit (PDU). NOTE: If you are not using a PDU, route the power cord directly to a properly rated and grounded AC wall or floor outlet. 4-24 HP 10842 Rack Reference Guide