HP 14-ap000 Maintenance and Service Guide - Page 33

Memory

Get HP 14-ap000 PDF manuals and user guides View all HP 14-ap000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Memory Description Memory-SODIMM 4GB PC3L 12800 (maximum 8 GB) Spare part number 691799-855 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the memory, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 20), and then remove the following components: a. Battery (see Battery on page 22). b. Optical drive dummy (see Optical drive dummy on page 22). c. Hard drive (see Hard drive on page 23). If you are replacing a memory module, remove the existing memory module: 1. Lift the clear film covering the memory module. 2. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. Component replacement procedures 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Memory
Description
Spare part number
Memory—SODIMM 4GB PC3L 12800 (maximum 8 GB)
691799-855
IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the memory, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
Base enclosure
on page
20
), and then remove the following
components:
a.
Battery (see
Battery
on page
22
).
b.
Optical drive dummy (see
Optical drive dummy
on page
22
).
c.
Hard drive (see
Hard drive
on page
23
).
If you are replacing a memory module, remove the existing memory module:
1.
Lift the clear film covering the memory module.
2.
Pull away the retention clips
(1)
on each side of the memory module.
The memory module tilts up.
Component replacement procedures
25