HP 14-ap000 Maintenance and Service Guide - Page 47

WLAN cable, Speakers see

Get HP 14-ap000 PDF manuals and user guides View all HP 14-ap000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

WLAN cable Description WLAN cable Spare part number 792505-855 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the WLAN cable, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 20), and then remove the following components: a. Battery (see Battery on page 22). b. Optical drive dummy (see Optical drive dummy on page 22). c. Hard drive (see Hard drive on page 23). d. Memory (see Memory on page 25). e. WLAN module (see WLAN module on page 28). f. Heat sink and fan (see Heat sink and fan on page 30). g. Speakers (see Speakers on page 32). h. Microphone (see Microphone on page 34). i. System board(see System board on page 36). Remove the WLAN cable: ▲ Disconnect the WLAN antenna from the WLAN module(1), release the WLAN cable from the tape securing it (2), and then lift the cable to remove it (3). Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
WLAN cable
Description
Spare part number
WLAN cable
792505-855
IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the WLAN cable, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
Base enclosure
on page
20
), and then remove the following
components:
a.
Battery (see
Battery
on page
22
).
b.
Optical drive dummy (see
Optical drive dummy
on page
22
).
c.
Hard drive (see
Hard drive
on page
23
).
d.
Memory (see
Memory
on page
25
).
e.
WLAN module (see
WLAN module
on page
28
).
f.
Heat sink and fan (see
Heat sink and fan
on page
30
).
g.
Speakers (see
Speakers
on page
32
).
h.
Microphone (see
Microphone
on page
34
).
i.
System board(see
System board
on page
36
).
Remove the WLAN cable:
▲
Disconnect the WLAN antenna from the WLAN module
(1)
, release the WLAN cable from the tape
securing it
(2)
, and then lift the cable to remove it
(3)
.
Component replacement procedures
39