HP 14-ap000 Maintenance and Service Guide - Page 46
Remove 2 Phillips screws, Lift the system board
View all HP 14-ap000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
3. Open the TouchPad cable zero-insertion force (ZIF) connector (1), and then disconnect if from the system board (2). 4. Remove 2 Phillips screws (1). 5. Lift the system board (2), and then remove it (3). Reverse this procedure to install the system board. 38 Chapter 5 Removal and replacement procedures for authorized service provider parts
3.
Open the TouchPad cable zero-insertion force (ZIF) connector
(1)
, and then disconnect if from the
system board
(2)
.
4.
Remove 2 Phillips screws
(1)
.
5.
Lift the system board
(2)
, and then remove it
(3)
.
Reverse this procedure to install the system board.
38
Chapter 5
Removal and replacement procedures for authorized service provider parts