HP 14-r200 Maintenance and Service Guide - Page 80
Reverse this procedure to install the WLAN module.
View all HP 14-r200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
3. Remove the WLAN module by pulling the module away from the connector (3). NOTE: If the WLAN antennas are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WLAN module. 72 Chapter 4 Removal and replacement procedures
3.
Remove the WLAN module by pulling the module away from the connector
(3)
.
NOTE:
If the WLAN antennas are not connected to the terminals on the WLAN module, the protective
sleeves must be installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
72
Chapter 4
Removal and replacement procedures